Online flea market: DIy Library in 6 plates

Diy Library in 6 planks embedded in each other the planks which protrude from the base are held by small brackets so as not to bend the base is fixed to the wall from above with the bottom being placed on the ground. In order not to have an offset, the two vertical boards must be cut together. Do not hesitate to make the notches a little wider for a 2.5 thick board cut to 2.6 2.7 otherwise you will be forced to do touch-ups during assembly. Once assembled you will only have to hunt for armchairs and a lamp.

Materials:

6 boards of 2m on 7.87 inch thickness 0.98 inch

Tools:

Jigsaw, wood scissors, drill, screwdriver.

duration:

3 hours approximately.